0 Cookie Img

5 Ply Automatic Line

5 Ply Automatic Line
5 Ply Automatic Line
Product Code : MMT005
Product Description

5 PLY AUTOMATIC PLANT

1. Electric Roll Stand. 1600mm

Technical Parameter:

1. Max diameter of the paper roll: φ1500mm

2. Expiry width: 600mm-1600mm

3. Electrical adjust the up-low, clamp-loosen, movement and center.

4. The tighten adjust adopt pneumatic or manual brake, expandable chuck.

2: DG- Pre- Heater

Technical Parameter:
1. Diameter: 600mm.
2. Expiry width:1600mm.

Product characteristic:The surface of the roller are trated with grinding and polishing.

3: Vacuum Single Face Paper Corrugation Machine:

Technical parameter: 

1. Design speed: 100m/min

2. Expiry width: 1600mm

3.Roller diameter: φ280mm

4.Pre-heater roller: φ280mm

Product characteristic: 

5. Vaccumabsorb type guide paper with wind control.

6. The glue roller are guide slippage, convenient to remove and install.

4: Transport Bridge:

Technical Parameter:

1. Design speed: 100m/min.

2. Expiry width: 1600mm.


5: RG-Tripe Pre Heater:

Technical Parameter:

1. Roller preheater:φ600mm 
2.Expiry width:1600mm
3.The surface of each rollers are dealt with grinding and chromeplated, clean and wearable.

4. Butterfly shape. ensure the reel paper receive heat uniformly.

6. Gluer:

Technical Parameter:

1. Glue roller diameter:φ219mm,The surface of the glue roller is dealt with net carving and chromeplate.

2. Pneumatic control the raise and down of the press roller.

3. Separate frequency conversion drive is choosable.

4. Can choose touch press system.

Technical Parameter:

Design speed: 100m/min / Expiry width:1600mm


7.DF-500 Double Baker System

Technical parameter:

1. Design speed: 100m/min

2. Expiry width:1600mm

3. Temperature:160-200.

4. Steam pressure: 0.8-1.3Mpa

5. Power: 55kw

6. Hot plate:11x600mm units

Capability:

1.The surface of the hot plate is vetted.

2.The hot plate is dense type, electric control the up and down.

3.Can adopt Section pressure or whole pressure according to the layer of the production line. which is favor of the molding of the paperboard.

8. Thin Blade.

Technical Parameter:

1.Design speed: 100m/min

2.Expiry width:1600mm

3.five knife eight press line.

4.Adopttunqsten steel thin blade high speed cutting. the edge unknit and lubricity.

9. Rotary Knife Cutter 1600mm

Technical Parameter:

1. Design speed: rotary knife 100m/min

2. Expiry width: 1600mm

3. Cutting scope: 500-9999mm. Cutting precision:±1mm.

Capability:

4. The knife axis is small, the girth of the knife is short. average speed is high. can improve the production efficiency.

10.Sheet Delivery System

Technical Parameter:

1. Max. width of paperboard:2500mm.

2. Automatic stack and collect cardboard.

3. With electrical transmit horizontally.

4. Vertical meet cardboard adopt wide conveyer belt to transmit.

11. Glue Making System

Two big glue tank one small glue tank

12. Steam system (one set, without boiler and pipe).

Contact Us

No.40, Vandikaran Street, Maduvankarai, Guindy, Chennai, Tamil Nadu, 600032, India
Phone :91-44-22445610