MANO INDUSTRIAL MACHINE TOOLS
3 Ply Corrugated Box Plant

3 Ply Corrugated Box Plant

Send Inquiry

1. Electric Roll Stand.


Technical Parameter:

1. Max diameter of the paper roll: 1500mm

2. Expiry width: 600mm-1600mm

3. Electrical adjust the up-low, clamp-loosen, movement and center.

4. The tighten adjust adopt pneumatic or manual brake, expandable chuck.

2: DG- Pre- Heater

Technical Parameter
1. Diameter: 600mm.
2. Expiry width:1600mm.

Product characteristicThe surface of the roller are trated with grinding and polishing.

3: Vacuum Single Face Paper Corrugation Machine:

Technical parameter

1. Design speed: 100m/min

2. Expiry width: 1600mm

3.Roller diameter: 280mm

4.Pre-heater roller: 280mm

Product characteristic

5. Vaccumabsorb type guide paper with wind control.

6. The glue roller are guide slippage, convenient to remove and install.

4: Transport Bridge:

Technical Parameter

1. Design speed: 100m/min.

2. Expiry width: 1600mm.

5: RG-Tripe Pre Heater:

Technical Parameter

1. Roller preheater 600mm 
2.Expiry width1600mm
3.The surface of each rollers are dealt with grinding and chromeplated, clean and wearable.

4. Butterfly shape. ensure the reel paper receive heat uniformly.

6. Gluer:

Technical Parameter:

1. Glue roller diameter:219mm The surface of the glue roller is dealt with net carving and chromeplate.

2. Pneumatic control the raise and down of the press roller.

3. Separate frequency conversion drive is choosable.

4. Can choose touch press system.

Technical Parameter

Design speed: 100m/min / Expiry width:1600mm

7.DF-500 Double Baker System

Technical parameter

1. Design speed: 100m/min

2. Expiry width1600mm

3. Temperature:160-200.

4. Steam pressure: 0.8-1.3Mpa

5. Power: 55kw

6. Hot plate:11x600mm units

Capability:

1.The surface of the hot plate is vetted.

2.The hot plate is dense type, electric control the up and down.

3.Can adopt Section pressure or whole pressure according to the layer of the production line. which is favor of the molding of the paperboard.

8. Thin Blade.

Technical Parameter:

1.Design speed: 100m/min

2.Expiry width:1600mm

3.five knife eight press line.

9. Rotary Knife Cutter 1600mm

Technical Parameter:

1. Design speed: rotary knife 100m/min

2. Expiry width: 1600mm

3. Cutting scope: 500-9999mm. Cutting precision:±1mm.

Capability:

4. The knife axis is small, the girth of the knife is short. average speed is high. can improve the production efficiency.

10.Sheet Delivery System

Technical Parameter:

1. Max. width of paperboard:2500mm.

2. Automatic stack and collect cardboard.

3. With electrical transmit horizontally.

4. Vertical meet cardboard adopt wide conveyer belt to transmit.

11. Glue Making System

Two big glue tank one small glue tank

12. Steam system (one set, without boiler and pipe).